Click on the image to check the artwork
By certification 
Brief
As the industrial winch, it is usually applied into mine or building construction to pull supplies. Its bearing capacity is from 0.5ton to 5ton. Plus the high working speed, it can bring the high working efficiency. Besides, its new design and components of high working grade extend its service life and simply the maintenance. The expert motor and electronic control can improve the output.
Data
Item No. |
AMW-3200 |
Load |
160m |
Wire Rope Size |
160m*16mm |
Pulling Speed |
8-14m/min |
Motor Power |
7.5kW |
Voltage |
3p, 220/ 380/ 440V, 50/60Hz |
N.W. |
550kg |
How to maintain the industrial winch?
1. The air inlet of motor shall not be blocked by dust, fiber and etc. Besides, its surface need to be kept clean and the using environment need to be kept dry.
2. The motor should be kept lubricated during the operation. When the bearing is overheated or the lubrication is deteriorated, the lubricating grease must be changed in time.
3. When the thermal protection constantly occurs, the source of the fault should be found out at first. Only after eliminating the faults, the winch can be put into use.
Structure Details
Other Different Kinds of Winches
http://www.wellmanwinch.com/
